Building Your Dream
Anderson's Expert in
Residential Concrete
With over three decades of experience in the concrete industry, Xtreme Concrete Services prioritizes your needs above all else.
ABOUT OUR COMPANY
Serving Anderson, SC and the Upstate of South Carolina & North Georgia Since 2012
DANIEL MILLER
OWNER
ROY MILLER
FOREMAN/ SPECIALTY PROJECTS
ANTONIO DE LEON
FOREMAN/ CONCRETE CREW
OUR CREW
HARDWORKING, AMBITIOUS, AND DEDICATED
Build Your Dream
Anderson Concrete Services
Counter Tops
OUTDOOR KITCHEN
Concrete
Stamped Concrete Restoration
Outdoor Living
What Our Clients Say
Reviews
Mandy Dumas
"Exceptional company, owner and crew! Top notch workmanship, dedication, honesty, fair pricing, and the list goes on!"
Lindsay Martin
"Our front and back sidewalks are beautiful! We get compliments every time someone is over and a lot of people are fooled and think we had rock sidewalks laid!"
Christian Miller
"They have done several jobs for me. They were on time on budget and did excellent work."
Lauren Shera
"Excellent job on my driveway! The crew did a fantastic job, paying attention to every detail! I will definitely use them again in the future. If you need concrete work done, this is the company to call!"
Learn More
Frequently Asked Questions
1. What benefits can I get by opting to use a concrete driveway instead of an asphalt driveway in Anderson?
Begin by considering the cost of the driveway over its lifetime. A good quality concrete driveway will last more than 30 years with little or no maintenance. Asphalt driveways need periodic sealing coats to retard-age related cracking. Even properly constructed residential asphalt driveways will deteriorate more quickly due to environmental influences than due to vehicle traffic. If you consider the cost of surface and crack sealers and the shorter life-span of the asphalt, concrete will cost much less. The rising cost of petroleum the last several years has raised the cost of asphalt to be close to the same cost as concrete.
2. Do I need to seal my new concrete driveway?
You should apply a high-quality sealer to all exterior concrete slabs exposed to freeze-thaw conditions. The sealer helps protect the concrete from moisture absorption, exposure to chemicals, and grease and oil stains. On decorative colored concrete, a sealer will also help enhance the color.
Generally, there are two categories of sealers for exterior concrete: film-formers and penetrants. Penetrating sealers tend to offer the best protection from moisture absorption. Regardless of the sealer you use, be sure it’s applied according to the manufacturer’s instructions.
3. What if the color isn't what I expected?
It’s unrealistic to expect your contractor to precisely match the color of your concrete driveway to a showroom sample, a neighbor’s decorative concrete driveway, or a photo from a brochure. Even plain concrete can exhibit color variations, especially if the project requires more than one load of concrete or if the concrete placements are made on different days. Most of these variations are minor and will fade over time.
4. How thick should a concrete driveway be?
A minimum of 4 inches is recommended. Keep in mind that the 2 x 4’s often used to form driveways are only 3 ½ inches wide, so the ground inside the 2 x 4 forming needs to be removed at least ½ inch below the bottom of the form. Thickness is the major factor (even more than the strength of the concrete) in determining the driveway’s structural capacity. Increasing your driveway’s thickness from 4 inches to 5 inches will add 20% to your concrete cost, but the additional inch of concrete will add almost 50% to load-carrying capacity of your driveway.
5. What type of finish should I use?
The two main types used are hard-troweled and broom finish. Trowel finishes are usually used indoors where a smooth, hard and flat surface is required. Broom finishes are appropriate for exterior slabs such as sidewalks, offering durability and a slip resistant surface. Decorative finishes are also available, including: Patterned, Colored and Exposed Aggregate.
6. What provision can be made to avoid cracks?
There are many reasons why concrete cracks. Cracks rarely affect structural integrity. The majority of concrete cracks usually occur due to improper design and construction practices, such as: omission of isolation & control joints, improper jointing practices, improper sub grade preparation, the use of high slump (very wet) concrete or addition of water on the job, improper finishing and inadequate or no curing. Concrete “shrinks” slightly as it hardens, therefore; proper spacing of joints is most important.
7. Should there be joints in a concrete driveway?
Install control joints at a spacing of no more than 12′ x 12′. Spacing joints at wider intervals invites random cracking. While such cracks are generally not a structural problem, and will not reduce the service life of the driveway, they are unsightly.
8. Why should concrete driveways be cured?
Curing of concrete is the final step of the construction process, and one of the most important. Unfortunately, it is also one of the most neglected. In extreme cases, failure to cure concrete can result in reductions of strength up to 50%. Curing or keeping the surface moist to assure greatest hydration of cement and highest potential strength is easily done through spray membranes or other readily available products and procedures. Curing compounds should be applied after the final finishing operation to increase the concrete’s resistance to the effects of weather, and to decrease the occurrence of surface defects.